Bus Shelter Lighting
Sun In One Solar Bus Shelter
The Run time of the lighting period can be designed subject to project requirements.
Nightly run time is subject to lamp power selection, quantity of lamps per system, solar panel selection, and battery capacity selection for a given location.
Please consult with our engineers for specific component recommendations..
You want the light to be down light in the roof of the structure because it reduces the glare and it forces the light down on to the rider so that the bus driver can easy see the stop and not have any glare from the light in their eyes.
Light Fixture
Our LED Light is currently the only 98 CRI LED Bus Shelter light on the market
Luminaire power consumption is 8 or 15, 16 or 30 Watts.
Light output is from 1120 to 2100 lumens per bulb and 1 or two bulbs per fixture.
LEDs are powered with a LED driver and include optional programmable dimming control.
All LEDs are white at approx. 4000K to 6000k color temperature. Lighting color temperatures are available by special order only and at extra cost.
LED life is typically up to 100,000 hours.
These American Made enclosures meet IEC Standards, and are IP66 rated.
All enclosures are UL Listed US and CA.
Offered as a 2’ long or 4’ long vapor tight enclosures.
2’ light fixture dimensions are approx. 26” L x 4” W x 3.5” D
4’ light fixture dimensions are approx. 52” L x 4” W x 3.5” D
Vandal resistant fiberglass and polycarbonate construction.
The lights may be directly screwed or bolted onto a solid surface instead of using the supplied mounting brackets .
Battery
System supplied comes standard with 12 Volt batteries.
If additional Batteries are needed, they are wired in parallel to make a 12 Volt system.
Standard battery capacity options available: 35AH AGM, 55AH AGM, or 85AH AGM.Or 60 AH Lithium Batteries. Higher capacity batteries available by custom order.
Please consult our engineers for specific battery capacity requirements per your system configuration and performance requirements.
Classified as Non-spill able (defined by DOT, ICAO and IATA), Non HAZMAT, and valve regulate.
Conforms to ISO9001, ISO/TS 16949, and ISO14001 standards.
Typical battery life is approximately 5 to 8 years, but warrantied for limited 5 years subject to environmental factors.
Battery Enclosure
UL Listed Aluminum lockable battery enclosure will accommodate the rechargeable batteries and charge controller (padlock not included.)
Designed to conform to NEMA 3R and IP22 rating standards for Outdoor Enclosures. Offering protection against rain, snow, and sleet.
The battery enclosure can be mounted on to the structure or to a pole mount, depending installation preference and battery capacity.
The battery box has pre-drilled holes to enable secure installation to a vertical surface.
Battery Enclosures: UL Listed aluminum Box, or stainless steel (Special Order).
The battery box is approx. 16″ x 16″ x 10″ LxWxD.
Solar Panel:
Range of solar panel power available from 50W to 200W. More powerful panels available with the help of one of our engineers.
Please consult with our engineers for specific solar power recommendations. The solar panel power requirements are subject to LED consumption, installation location, and preferred illumination period.
The solar panels supplied are highly efficient monocrystalline solar panels with aluminum frame.
Anti-reflective and anti-soiling surface that reduces power losses from dirt and dust.
Certified to withstand high wind loads and snow loads and resistance to high salt and ammonia.
Manufactured to international standards, verified and certified by independent testing laboratories. (UL, ETL, IEC, MCS, and TUV)( We also have C1D2 panels available)
Assembled to strict quality control standards; international standards ISO 9001 and ISO 14001.
Typical solar panel life is over 30 years, subject to environmental factors.
Approx. 18′ (5m) of pre-wired connection cable is supplied.
Solar panel extension cables are available upon request.
Charge Control System:
MPPT charge controller which automatically controls the solar panel power, battery charging protecting the battery from over discharging and running the lighting function and operation.
Suninone’ s MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers.
Our MPPT Controller offers Bluetooth Controls as standard and comes with full programmability of load output: dusk to dawn, Controller allows for programing mode which lets the user define the lighting run time, and comes with integrated diming (all standard features).
Pre-programmed software for load output, dusk to dawn lighting, single timed lighting, dual timed lighting, dimming option and the ability of interfacing with motion detection, where required.
Lighting control features come preprogramed at dusk to dawn unless you pick our 8 hour kits, or on at dusk for X amount of hours then off, or on at dusk for X amount of hours, then off, then back on again for X amount of hours before dawn.
The dimming option can be used in conjunction with motion activation (where applicable).We do not prefer Motion Dimming systems we think a well lite structure all the time during hours of use is a safer area then Motion system but we do have them with Dimming and the dimming can be any percentage from 0-100%.
Our controller supports real time data monitoring, 30 day performance history, and user programmability from Apple or Android smartphones, tablets, etc. Use of this feature requires the standard MPPT Bluetooth technology. For use with our Free Life Time Support you can send us your data from your phone to help you adjust your system to help you have it work the way you want to work.
Operating temperature is -22 deg. F (-30 deg. C) to 140 deg. F (+60 deg. C).
Dimming option (optional and must be stated at time of ordering) allows the lighting to dim at any time during the illumination time.
Racking
The preference of the system is based on getting the solar panel at the best angle to the sun to generate the most power you can with the smallest foot print. The Racking helps us with that we use Aluminum racking with stainless steel hardware. We select the best racking for the client request understanding the less the panel is facing the sun with the best angle the bigger the solar panel needs to be to get the same successful result.
We use Aluminum Side of Pole racking that mounts to a pole.
Top of Pole racking that mounts to the top of the pole and comes in 2, 2.375 or 4 inch sizes.
Roof mount racking that is just mounted directly to the roof and is at the angle of the roof and we need to know what that angle is because additional solar panels
Roof mount racking with adjustable back legs to give the system the best angle.
Mounting feet for standing seem roofs and other roofs are available.
Mounting on the Bus Structure or a Pole Mounted system:
The Placement for the systems is based on the best performance to the sun so there are times when you can have the solar panel flat to the roof or at a 45 degree angel or Mounted on a pole. This can be because of shading from trees, structures or the fact that the road may be north south and your structure needs there is not enough room to mount it on the end of the structure. Also with newer structures you may not have a roof to put it on you may have an acrylic top which does not let you mount a panel on it and pole mount may be best.
Installation:
Plug and Pay. All connections are simple and quick.
Mounting Racking are included to allow the solar panel to attach to a vertical or horizontal surface but side of pole is standard or adjustable leg roof mount.
Easy to install into almost any type of Bus Shelter, mail shelter, Picnic pavilion, canopy, or car port.
The solar panel must be installed in a location where it can receive full direct sunshine.It needs full sun from 9 am to 3pm or the system design must be modified and this is on the client to provide the clear sunlight on the panel for that window and usually set facing South at an 40 degree angle is best in US and Canada (where adjustment options allow). The solar panel must not be installed in a shaded or partly shaded location and never in wooded area. The standard specifications of the system (particularly the solar panel Wattage and battery capacity) may need to be adjusted and that needs to be done before ordering. An example is some clients want the solar panel to be flat to the roof you need to understand you can need up to 50% more solar for the same system to handle the same power needs at a 45 degree size panel to produce the same power.
The system sizing and components are determined by your geographic location, Angle of solar panel to solar south, power consumption (LED Wattage) and the total amount of hours of illumination time required. Such changes to the standard specifications may increase or decrease the cost shown. Please contact us for more information or assistance we are here to help you. The illumination time is estimated and subject to various factors including (but not limited to) shading, geographic location, seasons, temperature, weather conditions & location of product etc. The illumination time of most solar lights can reduce during winter months when the weather is poor and the days are shorter. During this time insolation hours decrease accordingly. Shorter illumination time due to one or more of the above factors does not define the product as being ‘defective’ or ‘not as described’. All solar lights must be used in a completely dark location at night time otherwise they may not illuminate. Nearby strong lighting sources or ambient lighting may affect the operation of a solar light. This does not define the product as being ‘defective’ or ‘not as described’. Please note, if you do not install or use this product for several months the battery may discharge naturally on its own. By allowing a battery to deep discharge it may cause irreversible damage as the battery may then lose the ability to recharge or hold a full charge. Although unlikely, we reserve the right to supply this product with any minor alterations or minor changes to the specifications (shown above by text description or by photographs) due to different supplies or product batches received, incorporating such product changes made by the manufacturer, without further notice. Descriptions, specifications and photographs are updated regularly but may not be current when minor changes to a product have only recently been made.
WHAT IS CRI?
Whether you’re an artistic person or not, our eyes are sensitive to light quality and color. A red shirt lit directly with noontime sunlight will render much different than if lit under a fluorescent bathroom light. The Higher CRI of our LED it will help identify objects with the better light.
WHY IS THE SUN-IN-ONE LED WITH A 95+ CRI IMPORTANT TO YOU?
– Displays all colors in almost natural light, making it easier to distinguish slight shades of colors and tones
– See the true color of meats, fruits, and vegetables in the grocery display case
– Enhances skin tone, hues, and textures, making rooms and products in them look their best – converting foot traffic into sales
– Reduces eye strain in the office, workplace or at school, increasing productivity and safety
– Easier to distinguish colors in security cameras
– Less light distortion at night when driving and the colors you are seeing a closer to real colors that could decrease your reaction time while driving.
WHAT IS CRI AND WHY YOU WANT AN LED WITH A HIGH CRI?
Color Rendering Index, commonly referred to as CRI, is a method we can use to measure how color looks to the human eyes, depending on the light source as compared to the sun. The CRI provides a scale of values up to 100, with 100 being the best color rendering light quality and a value below zero representing very poor color rendering.
When a light has a CRI of 100, it means that there is no difference in color rendition between the light and the reference light (the sun). Likewise, a CRI of 75 means that the light bulb renders a 75% replication of the visible colors that the sun shows, given that both lights have the same color temperature. That is the cri of the average streetlight. Our eyes are sensitive to light quality and color. The higher the CRI value, the more accurate the colors will be.
Options : Solar run IOT Smart Bus Shelter is here Today
Phone Charger:
4 port USB Phone Charger in the Electrical box with Wire from the Solar Kit.
This this phone charger is in a UL outdoor rated electrical box with USB 4.0 plugs
Security Camera:
Security Camera built into the Light Fixture with a 360 degree fisheye lens. The camera is a 6 mega pixel solid state commercial grade system with 256 gigabits of on site video storage. The system comes with a Video management system that can allow you to monitor the bus shelter and count the rides and human traffic at that location. The back hauling of the video can be done through, cell modem, wireless networks or hard wired.
WIFI Hotspot:
Suninone solar power unit can also allow offering WI-FI service at the Bus Shelter with a WIFI Hot Spot at that location. They backhauling of the connection is the same as the security camera. We also have a town hall portal for the Wi-Fi so that you can regulate the usage and track any abuses.
Advertising Lighting:
With the upgrading your lighting in your bus Shelter you can also add advertising lights to increase revenue the size and wattage of lighting in the sign drives they sizing of the system so call on of our engineers and let them help you walk through the process.
Powering Small Digital Signage:
Power smaller bus shelter digital signs and schedules that will keep riders up to date and increase rider satisfaction.
Coming Soon Battery Bicycle charging
Why use Suninone Solar Bus Shelters?
We work with client on every installed system to you success in your installation of you bus shelter and your Solar Lighting. Biggest question is what direction is the shelter facing and where is south.
Only bus shelter lighting company that has a 98 CRI light so that lighting has less glare, true color clarity for drivers to see people in the shelters. Better security with better lighting.
Years of Building Solar System around the world with systems designed on all 7 continents. Because of this experience, we ask the hard questions before you purchase the system.
We have designs that fit most hurdles in designing and installing Solar Shelters.
5 year Warranty on everything, expect the solar panel, which has a 25-year power warranty and this include the battery.
We ship and support our systems all over the world.
We also do consulting and operational analysis reports of existing bus structures for solar lighting.
Sun-In-One Bus Shelter Lighting Kit Components Include:UL Listed Photovoltaic Solar Panel
- UL Listed 8 Watt LED Light only 98 CRI Bus Shelter light on the market today
- UL Listed American made Vapor Tight Light Fixture
- UL Listed Photovoltaic Deep Cycle AGM Batteries
- CE Certified Photovoltaic Controller with or without blue tooth lighting controls
- UL Listed American Made Aluminum Housing or Fiberglass Housing
- UL Listed Wires
Options Motion Sensing, Dimming, USB Charging ports, Vandal resistant hardware and built in Security Cameras.
For more query feel free to Contact us
